sales@1machinery.com
|
|
+1-819-346-2369 sales@1machinery.com |
Specifications
| Ask for quotation | |
| Stock ref. # 1980 |
|
|
Other specifications
FAGIMA DOMINUS 5AX 3200 VERTICAL MACHINING CENTER, 2013 WORKING CENTRE WITH MOBILE UPRIGHT, MODEL DOMINUS 5AX 3200, 2013 Resume options X-axis = 3200 mm Y-axis = 1200 mm Z-axis = 1000 with head in vertical position / 1100 with head in horizontal position A-axis (head) = ± 120° Electro-spindle HSK 100 12000 RPM Portable electronic handwheel with Heidenhein cnc : HR-410 Heidenhain numerical control, model iTNC 530 Tool change with 64 random Heidenhain absolute optical scales Rotary table, diameter 800 mm ( 2000 Kg of loading ) Movable console for the entire working area Cooler for head, table and electro-spindle Electric cabinet conditioner Lubrication for moving devices Working area integral fairing Cover for moving parts Chip evacuator with goose-neck outlet Rear perimeter guards in accordance with EC standards and constructed of metal crush barriers Constructed of metal crush barriers/double working area laser tool part touch probe High Pressure washing ( internal splashguard ) automatically drove by manual control The operator is free to decide which kind of washing it can use. A big and powerful pump will be fixed on the floor through a shaft in order to exploit the whole power. This pump will deliver water in all castings that are assembled on the internal perimetral to clean the part from all chips that will be sent to the chip conveyor Automatic high-pressure cooling system through the spindle line with pup pressure increased to 40 bar, System pumps with higher pressure or different specifications Tracking system for workpiece dimension and alignment control by means of Renishaw RMP-60 radio wave sensor fitted on a tool cone, including measuring cycles for zero point determination, position determination, workpiece centering, etc.. System for measuring the tool length/radius and tool integrity function by means of a laser sensor Pendoular system Mobile upright structure Linear axis guides with ball runners on all the axes; X axis runs on 3 guides Approx. machine weight model Dominus-5AX 3200 ........................................................................ kg 30000 Travels and feeds X-axis travel (longitudinal - upright) full model Dominus 5AX 3200 ........................................................................ mm 3200 Y-axis travel (transverse - head) ( Standard ) mm 1200 Z-axis travel (vertical - head) - with head in vertical position mm 1000 +100 Spindle nose distance table surface - with head in horizontal position version Hsk 100......................................... 25-1025 mm - with head in horizontal position version Hsk100.......................................... 260-1360 mm FEED MOVEMENTS Fast: X, Y and Z m/mm 40 Working X, Y and Z mm/min 5-20,000 Continuous embedded turntable - 800 mm diameter - Possibility of operating in simultaneous interpolation with 5 axes or positioning with hydraulic lock - Table with T-slots aligned with the slots of the fixed table - Drive by means of torque motor - Hydraulic locking, braking torque 5900 Nm - Maximum operating torque 1280/2230 Nm (S1/S6) - Rotary encoder with direct position reading - Rotary axis resolution 0.001° - Fast speed 90 min-1 - Accuracy ± 2, repeatability 2 - Maximum load on the table: 2000 kg Table rotation torque motor cooling by means of conditioner Electrospindle with all numerical controls version HSK 100 Cone dimensions Spindle rotation speed (standard) min-1 30-12000 RPM Integrated spindle motor (electrospindle) Spindle motor power (cont./ S6-60%) kW 38 Maximum power available starting from a speed of min-1 2100 Maximum spindle motor torque (cont./ S1-100%) Nm 180 Electrospindle cooling system by means of oil conditioner Rotating head 4th axis continuous HSK 100 Head rotation driven by menas of torque motor ( on request and for particuliar uses, it can be used the wormscrew + crown ) Possibility of continuos operation in interpolation or positioning with Hydraulic lock Haed rotary axis travel +/- 120° Head rotary axis resolution 0.001° Rotary encoder with direct position reading Braking torque Nm 5000 Head rotation torque motor cooling by measn of conditioner TOOL CHANGE Tool type HSK100 Pitch Mm 127 Positions for each tool change N° 32 Total positions N° 64 Max. tolls diameter Mm 125 Max. tolls diameter with empty adjacent grippers Mm 180 Max tools lenght Mm 400 Max tool weight Kg 20 Max tool weight for each tool change Kg 400 Max total tool weight Kg 800 Reducer : reducer ratio 59 Max motor speed Min-1 3000 Pinion rotation for 1 position change Degree 112.5° OPTICAL SCALE MEASURING SYSTEM Linear measuring system (Heidenhain optical scale) repositioning accuracy 0.005 mm. GUIDE AND BALL SCREW LUBRICATION The linear guides and the ball screws are automatically lubricated by an air/oil control unit. HAVE HYDRAULIC UNIT The Have hydraulic unit is assembled for the following functions: - vertical axis balance - tool clamping/dechucking - head clamping/dechucking - embedded or outer rotary tables clamping/dechucking ELECTRICAL CABINET Our electrical cabinets are completely tidy in each part and materials are the best that the market can offer CONDITIONER On-board electric cabinet with heat exchanger. This efficient conditioner is assembled on the electric cabinet to keep always steady the temperature inside of it. REFRIGERATOR The electrospindle , the 2 rotary heads torque motors, and the 2 embedded tables have a steady temperature thanks to a powerful refrigerator Heidenhain numerical control, model iTNC-530 Super fast CNC, reading time up to 2,000 blocks/second Controlled axes (standard) X, Y, Z, A, B Display type 15 TFT colour Complete alphanumerical keyboard (type QWERTY) STD Heidenhain Minimum programmable increment: linear axes / rotary axes 0.001 mm / 0.001° Continuous spindle speed adjustment (0%-150%) STD Continuous working and fast feed speed adjustment (0%-150%) STD Cycle restart from any program lock STD Stop in seconds STD Heidenhain HR-410 portable electronic handwheel (x1, x10, x100) STD Tool length compensation STD Tool radius compensation on plane STD Tool radius compensation in space STD Pre-reading of up to 99 blocks in tool radius correction (M120) STD Number of tool correctors (length and radius) unlimited Cutting data tables (automatic revolution and feed calculation) STD Graphic display: plan, cross-section, solid (raw/finished) STD Graphic display simultaneously with program setup STD Graphic display simultaneously with processing of another program STD Graphic support on the fixed cycles STD Message display in Italian STD Interactive dialogue programming by means of symbol and software buttons (uncoded Heidenhain language) STD ISO code programming (as alternative to Heidenhain language) STD Self-learning: recording of actual positions for CNC (teach-in) STD Programming in absolute and incremental coordinates STD Programming in inches or millimetres STD Specularity with respect to the worktable axes STD Rotary translation of the coordinates on the worktable STD Scale factor STD Individual scale factor, axis by axis STD Fixed cycles for deep drilling, tapping, boring, etc. STD Rigid tapping STD Fixed drilling cycles on "profile" of points (grid, circumference) STD Circular interpolation: CC (circle centre), CR (radius), CT (tang.) STD Helicoidal interpolation STD Interpolation in polar coordinates STD Bevel (CHF) and union (RND) programming STD Free programming of FK profiles (plane geometry) STD Moving towards/away from profile: linear or tangential STD Pocket milling: rectangular, circular, slots (roughing / finishing) STD Pocket emptying cycles with islands with any profile, pocket profile and island profile finishing STD Machining cycles on profiles STD Flattening cycle on rectangular area STD "Smooth surface" machining cycle (inclined plane between 4 points) STD Heidenhain parameter language (Q parameters) STD Display pocket calculator STD Repeat of part of the program (label) STD Sub-program nesting levels 8 levels Fixed origin system (various tables with unlimited number of origins) STD Software limits STD Editing and transmission of running programs STD Message/alarm display with help functions STD Program memory (Hard Disk) STD Storable programs Unlimited Time counter STD Spindle fixed position orientation STD Tool life management STD RS-232C serial port, speed up to 115 Kbaud STD Fast Ethernet network interface 100BaseT (100 Mbit/s) NB: Connection to customer's network excluded STD Special functions of Heidenhain numerical control, model iTNC-530 Machining operations with turntables Cylindrical interpolation Feed in mm/min in cylindrical interpolation Worktable rotary translation in space 3-axis circular interpolation on inclined plane STD 3D machining Fast milling of profiles by points (high-speed machining) 3D tool compensation by means of normal vectors on the surface TCPM: allows changing the angle of any tiltable head by means of a handwheel without modifying the tool contact point Contouring keeping the tool perpendicular to the profile Spline interpolation Linear interpolation on 5 axes simultaneously Block processing time: 0.5 ms STD Equipment Head and ram thermal expansion compensation by means of sensors Total bodywork equipped with sliding doors with large transparent windows for perfect visibility Operator console mounted on an articulated arm Air blowing inside and outside the spindle for dry machining operations CHIP EVACUATOR Belt chip evacuator with goose-neck outlet incorporating the low-pressure system. The evacuator has a useful length such as to guarantee service along the X-axis. It is positioned at the lowest point so that not only the chips but also the coolant used during machining can be collected. The coolant is collected in a rear tank already filtered. The chips are evacuated by means of a ramp. The belt drive motor is fitted at the top of the rise. INTEGRAL FAIRING The model Dominus is equipped with an integral fairing protecting the working area. Its imposing appearance is the result of painstaking attention to detail. The doors are extremely lightweight, as they are driven both top and bottom by guides with ball runners. The shape of the doors allows closing off the entire working area, including the top, and when it is opened the pieces can also be loaded from the top using a crane. The movable telescopic system fitted vertically rises to the top so as to completely isolate the working area and the moving parts. The machine covers are in compliance with the EC regulations currently in force.
Photos
|
Machinery
Inc. |