Vendu

1959 DAVID BROWN MH100

Machines verticales à tailler les engrenages par fraise-mère, manuelles et CNC
Fabricant:
DAVID BROWN
Modèle:
MH100
Année:
1959
Action #:
0641
Pays:
Canada

Manufacturer: DAVID BROWN
Model: MH100
Year: 1959/60
Diameter: 149"
Control: *
Price: SOLD!  

                 
#MH100 DAVID BROWN VERTICAL PRECISION GEAR HOBBER
                 
New 1959/60, Serial No 633, Model MH100
                 
                 
EQUIPPED WITH:
                 
Stationary Table & Travelling Main Column Design,
                 
w/Outboard Support Column & Steady-Rest-Type
                 
Tailstock, w/8.668" Bore Dimension w/Interchangeable
                 
Bushes
                 
Standard Hob-Head w/Manual Hob Shift & Flywheel
                 
Conventional & Climb Hobbing Capability
                 
Variable Speed Main Drive Motor For Hobbing
                 
Work Table w/Dual Master Worm Wheels Of Special
                 
Phosphor/Bronze (Coarse & Fine Pitch Worm Wheels),
                 
w/Nickel Case-Hardened Steel, Precision Ground
                 
Master Dividing Worm
                 
Hydraulic Work Table Load Relief By Means Of Oil
                 
Pumped Into Space Between Table Bearing Surfaces,
                 
w/Pressure Regulated In Accordance w/Table Load
                 
Twin (Primary & Standby) Dual 1 HP Lubrication Pumps
                 
w/(1) Pump Providing Lubrication For General
                 
Lubrication Purposes & (1) Pump Providing Oil For
                 
The Hydraulic Table Load Relief. Standby Unit
                 
Activated Immediately Upon Failure Of Primary Pump
                 
Complete Coolant System, Including Tank & Twin
                 
(Primary & Standby) 1 HP Coolant Pumps, Standby
                 
Activated Upon Failure Of Primary
                 
Differential Mechanism For Hobbing Helical Gears
                 
Rapid Traverse For Radial Infeed Of Main Column
                 
Power Rapid Rotation Of Work Table For Work Truing
                 
Full Complement Of Electrics (Switch Gear Cabinet)
                 
w/Operator's Control Panel/Station w/Fault Lamp
                 
Indicators For Oil Pressure, Coolant Pressure,
                 
Engagement/Disengagement Of Fine & Coarse Pitch
                 
Worms, Etc., Including Interlock For Main Motor
                 
Shut-Off Without Proper Lube Pressure
                 
!------------------------NEW PAGE------------------------!
                 
Large Assortment Of Change Gears For Hob Speed, Index,
                 
Differential & Prime, w/Index Change Gears Set-Up
                 
For A Number Of Teeth One To Five Teetch Greater Or
                 
Less Than The Required Number, w/Compensation Made
                 
Through The Prime Differential Mechanism Controlled
                 
By Prime Change Gears
                 
Large Assoctment Of Hob Arbors
                 
Operating Instructions In English, w/Large Quanity Of
                 
Drawings, Diagrams & Charts
                 
                 
CATALOGUE SPECIFICATIONS:
                 
Gear Cut Diameter Hob without
                 
Outboard Support, Max.................. 149"
                 
Gear Cut w/Outboard Support
                 
Column, Max Dia........................ 118"
                 
Distance Work Table Centerline To
                 
Hob Spindle Centerline, Maximum........ 73"
                 
Distance Work Table Centerline To
                 
Hob Spindle Center, Minimum............ 7.9"
                 
Axial Travel, Maximum.................. 54"
                 
Distance Work Table Surface To
                 
Hob Spindle Centerline, Maximum........ 90.55"
                 
Distance Work Table Surface To Hob
                 
Spindle Centerline, Minimum............ 25.63"
                 
Work Table Diameter.................... 97.75"
                 
Work Table Bore Diameter............... 12"
                 
Work Table Bore Depth.................. (To Be Confirmed)
                 
Daimeter Hob Accommodated, Maximum..... 12"
                 
Workpiece & Fixture Weight, Maximum.... 65 TONS
                 
Diametral Pitch (Module) In Steel, Max. 1.5 DP
                 
Hob Spindle Speed Range................ 15 To 85 RPM
                 
Hob Feed Range......................... .014 Top .150 IPM
                 
Feed Range............................. .0098-0.48 IPR
                 
Main Motor, Horsepower................. 20 HP
                 
(2) Lubrication Pump Motors, HP........ 1 HP EACH
                 
(2) Coolant Pump Motors, HP............ 1 HP EACH
                 
!------------------------NEW PAGE------------------------!
                 
Floor Space Required................... 23'3" x 9'4"
                 
Overall Height......................... 15'10"
                 
Net Weight, Approximately.............. 78 TONS
                 
                 
NOTE: Machine Suitable For The Cutting Of Spur &
                 
Helical Gears, Pinions, Splines & Other Workpieces
                 
Of Similar Profile Up To 149" Pitch Diameter, 1.5
                 
D.P. (Module) w/54" Face Width
 
 

Ce matériel a été vendu. Des équipements similaires actuellement disponibles sont présentés ci-dessous.

Chargement...