Vendu

BULLARD CUTMASTER 74"

Aléseuses verticales
Fabricant:
BULLARD
Modèle:
CUTMASTER 74"
Action #:
1577
Pays:
Canada

Manufacturer: BULLARD
Model: CUTMASTER 74"
Year: *
Table Dia.: 74"
Swing: 82"
Under Rail: 62"
Capacity: *
RPM: 90
Motor: 50 HP
Includes: *
Price: SOLD!  

                 
74" BULLARD CUTMASTER VERTICAL TURRET LATHE
                 
                 
Serial No. 22457
                 
Capacity: Maximum swing 82"
                 
Maximum height under rail 62"
                 
                 
Table: 74" in. Diameter W/Radial and Parallel T-Slots
                 
                 
Feeds: 16 in. Geometric ratio
                 
Independent feed works for each head
                 
Vertical and horizontal feed can be engaged simultaneously
                 
to give 45 degree resultant feed in any quadrant
                 
Same is true of rapid power traverse
                 
The same for all heads .0026 to .500 IPR
                 
                 
Head RH & LH swiveling ram heads on cross rail
                 
Combinations:
                 
                 
RH Swiveling Vertical Travel 30 1/2"
                 
Ram Head: Horizontal travel right of center 42 7/8"
                 
Horizontal travel left of center 7 1/2"
                 
Will face full machine capacity
                 
Will swivel right or left of center 30 deg
                 
Screw feed & Rapid power traverse in all directions
                 
Toolpost hole 3 3/8"
                 
                 
LH Swiveling Vertical travel 30 1/2"
                 
Ram Head: Horizontal travel left of center 46 7/8"
                 
Horizontal travel right of center 1 1/2"
                 
Will swivel right or left of center 30 deg
                 
Screw feed & rapid power traverse in all directions
                 
Toolpost hole 3 3/8"
                 
                 
                 
Table Speeds: 20 from 2.4 to 90 RPM
                 
                 
Electrics: 50 HP motor & electrical equipment
                 
3/60/440 volt operation
                 
                 
Speed
                 
Control: Mechanical floor shift unit
                 
                 
Lubrication: Filtered oil circulated under pressure to all vital parts of the spindle and
                 
headstock. Individual reservoirs for all heads and feed works.
                 
                 
Measuring
                 
Devices: Accurately graduated dials and scales for motions in all directions.
                 
                 
Feed Control: Rate of feed is selected by two levers extending from the outer side of feed
                 
works. The engagement of the power feed is by means of levers extending thru
                 
the centers of the handwheels. These levers are also used to engage the power
                 
traverse. Hand feed is accomplished by means of the hammer handwheels.
                 
                 
Equipped
                 
With: Faceplate jaws
                 
                 
Approx
                 
Weight: 58,950 Lbs.
 
 

Ce matériel a été vendu. Des équipements similaires actuellement disponibles sont présentés ci-dessous.

Chargement...