Manufacturer: WALDRICH SIEGEN
Model: DH2000/30 - 12MCx13000
Year: 1993
Swing: 118.11"
Between Centers: 511"
Capacity: 160 Ton
Motor: 214.56 HP
RPM: 169
Control: Siemens Sinumerk 880 T
Price: SOLD!
WALDRICH SIEGEN MODEL DH - 2000/30 - 12MC x 13000
CNC HEAVY DUTY LATHE
Manufactured New In 1993.
Under Power In Excellent Condition.
* Siemens Sinumerk 880 T CNC Control System
* Steady Rests
* Belt Grinder
* Boring Unit
* Boring Bars
* Grinding Unit
* Chip Conveyor
* Tooling
Specifications.
Main Dimensions.
Length Of The Machine approx. 31900 mm 1,255.90
Width Of The Machine approx. 8200 mm 322.83
Height Of The Machine approx. 4200 mm 165.35
Max. Turning Diameter 3000 mm 118.11
Min. Turning Diameter 0
Boring Diameter Range 350 1800 mm 13.77-70.86
Workpiece.
Max. Workpiece Diameter 3000 mm 118.11
Max. Workpiece Length For Turning 13000 mm 511.81
For Boring 10000 mm 393.70
Weight Between Centers 80 Ton
Bed Dimensions.
Workpiece Bed.
Bed Height 700 mm 27.55
Width Above Guideways 1700 mm 66.92
Bed Length Approx. 26500 mm 1,043.30
Number Of Guideways 2
Carriage Bed
Bed Height 700 mm 27.55
Width Above Guideways 1400 mm 55.11
Bed Length Approx. 18000 mm 708.66
Number Of Guideways 2
HeadStock.
Drive Capacity Of Main Drive 160 KW
Speed Adjustment Range 60 2400 rpm
Faceplate Speeds Step 1 1 41 rpm
Step 2 4.2 169 rpm
Nominal Speed Step 1 10.3 rpm
Step 2 42.2 rpm
Torque At Faceplate 130000 Nm
Faceplate.
Outer Diameter 2400 mm 94.48
Clamping Range Between Jaws 300 2000 mm 11.81-78.74
Position 1. (Home Position) 300 2000 mm 11.81-78.74
Position 11 (Turned 180 Deg. 300 1650 mm 11.81-64.96
Number Of Clamping Jaws 4
Max. Clamping Pressure Per Jaw At a Torque Of 300 Kn
Max. Load Bearing Capacity Of Faceplate 40 Tons
Flanged Center.
Center Angle 75/90 Degrees
Diameter Of Center 125 mm 4.92
Max. Load Bearing Capacity Of Center 40 Tons
Center Shaft.
Located In The Boring Bar, Diameter Adjustment 710 mm 27.95
By Hydraulic Cylinder
Travel 20 mm 0.78
Flanged Center.
Center Angle 75/90 Deg.
Diameter Of Center 125 mm 4.92
Max. Load Bearing Capacity Of Center 40 Tons
Boring Unit.
Location: On The Workpiece Bed.
Boring Bar Guiding Bearing.
Feed Drive Capacity 15,7 Kw
Speed Range 0 2000 rpm
Standstill Torque 75 Nm
Feed Range 0 2790 mm/min. 109.84 ipm
Clamping/Unclamping On Bed Mechanical/Hydraulic
Diameter Of The Guide Bushing 710/300 mm 27.95 11.81
Clamping/Unclamping Of Guide Bushings Mechanical/Hydraulic
Boring Bar Supporting Bearing.
Adjustment By Hand Using a ratchet or
- By Pushing or Pulling Using a boring Slide
Clamping/Unclamping On The Bed Mechanical/Hydraulic
Diameter Of Guide Bushing 710/300 mm 27.95- 11.81
Clamping/Unclamping Of Guide Bushings Mechanical/Hydraulic
Boring Slide.
Feed Drive Capacity 15.7 Kw
Speed Range 0 2000 rpm
Standstill Torque 75 Nm
Feed Range 0 2790 mm/min. 0-109.84 ipm
Clamping/Unclamping On The Bed Mechanical/Hydraulic
Diameter Of The Guide Bushings 710/300 mm 27.95-11.81
Clamping/Unclamping Of Guide Bushings Mechanical/Hydraulic
Rapid Traverse 2790 mm/min. 109.84 ipm
Feed Power Of Boring Operations 120000 N
Torque At The Boring Bar Up To 130000 Nm
Boring Bars.
Quantity 2
Length 14500 mm 570
Diameter 710/300 mm 27.95-11.81
Boring Heads.
Diameter Range Of The Boring Heads:
Boring Head No. 1 345 495 mm 13.58-19.48
No. 2 495 645 mm 19.48-25.39
No. 3 645 795 mm 25.39-31.29
No. 4 794 945 mm 31.25-37.20
No. 5 945 1095 mm 37.20-43.11
No. 6 1095 1395 mm 43.11-54.92
No. 7 1500 1800 mm 59.05-70.86
No. 8 1300 1500 mm 51.18-59.05
Steady Rests.
Boring Steady Rests
Quantity 1
Capacity 850 1950 mm 33.46-76.77
Max. Load Bearing Capacity Of The Steady 40 Tons
Number Of Roller Holders 4
Adjustment Of The Roller Holders Manual
Adjustment On The Bed By Motor
Adjustment Speed Rapid Traverse 1667 mm/min. 65.62 ipm
Creep Speed 160 mm/min. 6.29 ipm
Clamping On The Bed Mechanical/Hydraulic
Loading Quill Interchangeable
Holding Capacity Quill 1 1960 1560 mm 77.16-61.41
2 1600 1200 mm 62.99-47.24
3 1240 1840 mm 48.81-72.44
Adjustment Of The Loading Quill Hydraulic
Travel 200 mm 7.87
Max. Thrust Force 400 Kn
Adjustment By Motor
Compensating Steady Rest.
Quantity 1
Capacity 200 1200 mm 7.87-47.24
Number Of Roller Quills 2
Max. Load Bearing Capacity Of Lower Quill 15 Tons
Quill Adjustment Manual
Quill Clamping Manual
Adjustment On The Bed Manual
Clamping On The Bed Manual
Steady Rests With Interchangeable Upper Parts.
Number Of Steadies 2
Steady Rest Base Parts
Adjustment On The Bed By Motor
Adjustment Speed Rapid Traverse 1977 mm/min. 77.83 ipm
Creep Speed 36 mm/min. .41 ipm
Clamping On The Bed Mechanical/Hydraulic
Lifting Devise For Center Quill Hydraulic
Travel 100 mm 3.93 ipm
Max. Thrust Force 450 Kn
Steady Rest Upper Parts.
Arrangement: Interchangeable On The Steady Base Part
3- Quill Design. Outer Quills With Supporting Rollers
Center Quill With Sliding Jaws
Holding Capacity 300 800 mm 11.81-31.49
Max. Load Bearing Capacity 30 Tons
Outer Quill Adjustment Manual
Outer Quill Clamping Manual
Center Quill Adjustment Hydraulic
Center Quill Clamping Manual
Center Quill Locking Mechanical
In Addition.
False Quills With Sliding Jaws:
Capacity 180 300 mm 7.06-11.81
Max. Load Bearing Capacity 10 Tons
Capacity 75 200 mm 2.95- 43.30
Max. Load Bearing Capacity 4 Tons
Quill Design With Sliding Jaws
Capacity 600 1100 mm 23.62- 43.30
Max. Load Bearing Capacity 45 Tons
Lateral Quill Adjustment Manual
Quill Clamping Manual
Center Quill Adjustment Hydraulic
Center Quill Clamping Manual
Center Quill Locking Mechanical
Center Quill Guiding Jaw Hydrostatic
Turning Carriage.
Number Of Carriages 1
Feed Drive Capacity For X and Z Axis 15.7 Kw
Speed Range 2000 rpm
Standstill Torque 75 Nm
Feed Range, Longitudinal/Transverse 0 4800 mm/min. 0-188.97 ipm
Rapid Traverse Longitudinal Transverse 800 mm/min. 31.49 ipm
Travel Longitudinal 13350 mm 525.59
Travel Transverse 1000 mm 39.37
Feed Power Longitudinal Transverse 120 Kn
Carriage Guiding Longitudinal Transverse Hydrostatic
Tool Carrier
Number Of Tool Carriers 2
Tool Carrier Adjustment By Motor
Adjustment Speed Rapid Traverse 1200 mm/min. 47.24 ipm
Creep Speed 160 mm/min. 6.29 ipm
Clamping/Unclamping Of Carrier Mechanical/Hydraulic
Locking Of Carrier By Fixed Stop
Width Of Tool Carrier 100 mm 3.93 ipm
Max. Projection 800 mm 31.49 ipm
Number Of Working Positions 5
Projection 300 400 500 600 700 800 mm
Main Cutting Power At a Projection Of 300 mm 200 Kw
Tool System.
Roughing/Finishing System WASI
Tool Change Manual
Tool Clamping/Unclamping Automatic
Attachments.
Belt Grinder.
3-Phase Motor
Rating 3.5 Kw
Speed 1740 rpm
Length Of Grinding Belt 2500 mm 98.42
Width Of Grinding Belt 60 mm 2.36
Belt Speed 23 m/s.
Boring Unit.
Boring Bar Diameter 250 mm 9.84
Boring Depth 1000 mm 39.37
Grinding Unit.
3-Phase Motor
Rating 5.5 Kw
Speed 850 1000 1700 rpm
Max. Grinding Diameter 2876 mm 113.22
Min. Grinding Diameter 1000 mm 39.37
Swiveling Angle +/- 25 Deg.
Wheel Diameter 450 mm 17.71
Wheel Width 60 mm 2.36
Chip Conveyor.
Arrangement: Chip Tote Conveyor Between Workpiece And Carriage Side
Drive Capacity 1.5 Kw
Conveyor Speed approx. 6 m/min.
Width Of Conveyor 450 mm 17.71
Loading Length 24000 mm 944.88
Total Length 25810 mm 1.616.14
Coolant Supply 150 300 L/Min.
Electrics 440 Volts/3PH/60 Hz.
We use cookies to improve your experience. Privacy Policy.
We use different type of cookies to optimize your experience on our website. You may choose which type of cookies to allow and can change your preferences at any time. Remember that disabling cookies may affect your experience on the website. You can learn more about how we cookies by visiting our Privacy Policy.
These cookies are necessary to the core functionality our website and some of its features, such as access to secure areas.
These cookies are used to enhance the performance and functionality of our website but are nonessential. However, without these cookies, certain functionality may become unavailable.
These cookies gather information to help us understand site usage, measure marketing effectiveness, and personalize your experience.
These cookies enhance ad relevance, prevent repeat ads, ensure proper display, and sometimes tailor ads to your interests.
