1990 WALDRICH SIEGEN DOUBLE COLUMN

Manufacturer: WALDRICH SIEGEN
Model: Double Column
Year: 1990/98
Capacity: 37.5 Ton
Table Size: 68.9" x 118"
Motor: 65 HP
Includes: FANUC 15M
Price: SOLD!  

                 
WALDRICH SIEGEN DOUBLE COLUMN BRIDGE TYPE VERTICAL MACHINING CENTER V/H CNC Type V/H-37 (IS) 200/200/175 x 300 (SINGLE TABLE)
                 
Serial No. 11.230 - Built in 1981
                 
                 
COMPLETE OVERHAUL BY WALDRICH SIEGEN GERMANY IN 1990
                 
UPGRADED WITH A NEW ATC MAGAZINE & ARM TO CHANGE TOOLS IN BOTH THE HORIZONTAL & VERTICAL SPINDLES.
                 
                 
Width between columns 2,000 mm (78.7")
                 
Distance from top of table to face of milling spindle 2,000 mm (78.7")
                 
Table working surface 1,750 x 3,000 mm (68.9 x 118")
                 
Clamping slots, 7 T-slots 22 mm (.866")
                 
Max. workpiece weight 37.5 t (82,670 lb)
                 
Milling Head
                 
Milling spindle speeds 16.7~3,000 rpm
                 
1st step 16.7~500 rpm
                 
2nd step 408~1,225 rpm
                 
3rd step 1,000~3,000 rpm
                 
Torque at milling spindle from 10~100 rpm 2,000 Nm
                 
Tool taper with collet ISO 50
                 
Cross section of ram 500 x 500 mm (19.7 x 19.7")
                 
Quill diameter 200 mm (7.87")
                 
Travels
                 
X-AXIS: Table 3,800 mm (149.6")
                 
Y-AXIS: Milling head cross 3,115 mm (122.6")
                 
Z-AXIS: Ram vertical 1,000 mm (39.4")
                 
W-AXIS: Quill vertical 500 mm (19.7")
                 
TOTAL TRAVEL (Z+W) = 59.05"
                 
                 
Feeds
                 
Table 5~10,000 mm/min (0.197~393.7 ipm)
                 
Milling head 5~10,000 mm/min (0.197~393.7 ipm)
                 
Ram 5~5,000 mm/min (0.197~197 ipm)
                 
Quill 10 mm/min (.394 ipm)
                 
Rapid traverse
                 
Table 10,000 mm/min (393.7 ipm)
                 
Milling head 10,000 mm/min (393.7 ipm)
                 
Ram 5,000 mm/min (197 ipm)
                 
Quill 2,600 mm/min (102.4 ipm)
                 
Feed Powers
                 
Table longitudinal 40,000 N
                 
Milling head cross 40,000 N
                 
Ram, vertical 40,000 N
                 
                 
When right angle attachments are used, the permissible feed forces are
                 
reduced to 25,000 N
                 
                 
Drives
                 
Milling spindle drive
                 
DC Motor
                 
Speed range 167~3,000 rpm
                 
at constant torque of 2,000 Nm
                 
Speed range 10~167 rpm
                 
at constant output of 37 kw
                 
                 
Table feed
                 
DC Servo Motor
                 
Speed range 2~3,737 rpm
                 
Output (100% ED) 3.15 kw at 1,000 rpm
                 
Torque 240 Nm max.
                 
                 
Milling head feed
                 
DC Servo Motor 2~4,125 rpm
                 
Speed range 3.15 kw at 1,000 rpm
                 
Output (100% ED)
                 
Torque 240 Nm max.
                 
                 
Ram feed
                 
DC Servo Motor 3~3,000 rpm
                 
Speed range 3.15 kw at 1,000 rpm
                 
Output (100% ED)
                 
Torque 240 Nm max.
                 
                 
Quill feed
                 
3-phase AC cage rotor main motor
                 
Speed 2,670 rpm
                 
Output (100% ED) 0.95 kw
                 
3-phase AC fine feed motor
                 
Speed 11.2 rpm
                 
Transmission of the gear 127 i
                 
Rapid traverse speed 2,670 rpm
                 
Fine feed speed 11.2 rpm
                 
Angular head (RAA)
                 
Immersion depth 500 mm (19.7")
                 
Drop 290 mm (11.4")
                 
Tool taper with automatic collet clamping ISO 50
                 
Milling spindle speed range 16.7~3,000 rpm
                 
Torque 650 Nm max.
                 
Angular head (RAA)
                 
Immersion depth 381 mm (15")
                 
Drop 365 mm (14.4")
                 
Swivel angle +/- 115 grad.
                 
Tool taper with automatic collet clamping ISO 50
                 
Milling spindle speed range 16.7~3,000 rpm
                 
Torque 650 Nm max.
                 
Tool storage chain
                 
Quantity of tool stations 52
                 
Max. tool diameter/adjacent pockets full 155 mm (6.1")
                 
Max. tool diameter/adjacent pockets empty 330 mm (13")
                 
Max. tool weight 55 kg (121 lb)
                 
Adjustment of chain
                 
Rapid traverse 12,700 mm/min (500 ipm)
                 
Fine feed 900 mm/min (35.4 ipm)
                 
                 
Standard Equipment
                 
Fanuc 15 CNC control (6-Axis) Installed in 1998
                 
                 
Upgraded axis drives & electrical panels Installed in 1998
                 
Angular drive gear box for the Y-Axis Replaced
                 
Ball screws (2 units) for the Z-Axis Replaced
                 
Hydrostatic racks on the X-Axis Replaced
                 
Inductosyn scales
                 
Hydraulic system
                 
90 deg. Angle head
                 
Universal head with A-Axis - not Simultaneous
                 
Chip conveyors (2) Each side of table
                 
                 
Main Dimensions:
                 
Overall length of machine 10,000 mm (393.7")
                 
Overall width of machine 5,800 mm (228.3")
                 
Overall height of machine 6,600 mm (259.8")
                 
Height above floor level 6,100 mm (240")
                 
                 
                 
*** The Width between columns can be extend to 3000 mm very easily ***
                 
                 
SHIPPING INFORMATION:
                 
                 
(1) 40' HIGH TOP OPEN TOP CONTAINER
                 
(3) 40' REGULAR OPEN TOP CONTAINER
                 
                 
*** LAYOUT DRAWINGS AVAILABLE BY E-MAIL ***
                 
*** VIDEOTAPE AVAILABLE SHOWING THE MACHINE DISASSEMBLED ***