Vendu

1995 TOSHIBA TMD-16

Aléseuses verticales CNC
Fabricant:
TOSHIBA
Modèle:
TMD-16
Année:
1995
Action #:
1783
Pays:
Canada

Manufacturer: TOSHIBA
Model: TMD-16
Year: 1995
Table Dia.: 63"
Swing: 78.8"
Under Rail: 45.3"
Capacity: 5 Ton
RPM: 280
Motor: 60 HP
Control: FANUC 15TA
Price: SOLD!  

                 
TOSHIBA TMD-16 CNC VERTICAL BORING MILL WITH LIVE MILLING
                 
SERIAL NUMBER 420089; BUILT 1995
                 
                 
MACHINE FEATURES AUTOMATIC TWO PALLET CHANGER (APC), FULL "C" AXIS WITH LIVE MILLING SPINDLE, 24 ATC, TWO 63" DIAMETER CHUCKS, AND FANUC 15TA CONTROL
                 
                 
Table diameter--63"
                 
Maximum swing--78.8"
                 
Maximum height top of table to bottom of ram--53"
                 
Maximum cutting height--45.3"
                 
Maximum cutting diameter--78.7"
                 
Maximum load on table--11,000 lbs.
                 
Travels--
                 
horizontal travel of rail head; -31.7", +44.1"
                 
vertical travel of ram; 31.7"
                 
vertical travel of cross rail; 19.7"
                 
Table speeds (2 ranges)--1.6 to 280 rpm
                 
Maximum table torque--15,900 ft-lbf
                 
Milling spindle speeds--12.5 to 1,500 rpm
                 
Feedrates--
                 
X-axis 472 ipm rapid/0.1 to 78.7 feed
                 
Z-axis 315 ipm rapid/0.1 to 78.7 feed
                 
C-axis 800 degrees per minute rapid/11.8 degrees per minute feed
                 
Automatic tool changer capacity (ATC)--24; 8 for turning/16 for milling
                 
Taper in ram--no. 50
                 
Section of ram--8.66" x 8.66"
                 
Table drive motor--60/50 HP
                 
Milling spindle drive motor--20/14.7 HP
                 
Power requirement--200/220 volts; 100 kVA
                 
Equipped with;
                 
automatic two pallet changer (APC)
                 
24 tool capacity automatic tool changer (ATC)
                 
turning and milling tool holders
                 
chuck top jaws
                 
(2) 63" diameter chucks
                 
coolant tank and pump
                 
Mayfran chip conveyor recently installed
                 
ATC tool hoist
                 
tool measurement presetter
                 
Fanuc 15 TA CNC control
                 
                 
Condition--good; inspect under power
                 
Weight--72,200 pounds
                 
Floor space--313" x 288" x 220" high (rail and ram in uppermost position)
 
 

Ce matériel a été vendu. Des équipements similaires actuellement disponibles sont présentés ci-dessous.

Chargement...